Carbon Fiber:

Twill Honeycomb

Variant

M-Spec Mirror Caps

$169.00

Free Shipping

Fast, Nationwide

Secure Checkout

SSL Encrypted Payment

30-Day Returns

Easy Return Policy

Limited Warranty

Quality Guaranteed

Sculpted M‑Inspired Mirror Upgrade.

These M-Style replacement caps reshape your mirrors with German motorsport‑inspired design and real carbon veneer. A lightweight ABS core preserves factory clip strength, while a deep gloss clear coat shields the weave from UV and road grit.

Wet-laid 2×2 twill carbon over OEM grade ABS core
Perfect clip alignment
UV stable finish. No flake
10 minute swap. Plastic trim tool recommended (not included)
Finish options: Gloss

Pair them with the PSM Spoiler for a unified, carbon-aero look.

Fitment

INFINITI Q50 (2014–2024) | All Generations

INFINITI Q60 (2017–2022)

Install

Tools » 2× nylon trim pry tools. No adhesives required.
Optional: Microfiber towel, 70 % IPA, nitrile gloves.

Prep » Fold the mirror column inward. Wipe the OEM housing and cap seam with IPA and dry for extra tool grip.

Remove OEM caps »
1. Insert Pry 1 at the lower inside corner until the first clip releases.
2. While Pry 1 holds the gap, slide Pry 2 along the bottom edge; work left-to-right until all lower clips pop.
3. Move Pry 1 to the top outside corner; twist gently to free the upper clip.
4. Lift cap straight off. Do not pull toward the glass (risk of scratching).

Inspect » Ensure all 10 OEM clips stayed on the cap, not in the housing. Remove any debris and/or broken clips.

Install your Bullet™ M-Spec »
1. Align top tabs first; seat them into the factory slots.
2. Press downward until both upper clips snap.
3. Work bottom edge from center outward, pressing until each clip audibly locks.
4. Run a fingertip around the perimeter; the seam should be flush and even.

Check » Cycle the mirror motor through full range via the mirror control toggle. Caps must stay seated with no rattle, while the mirror glass maintains OEM-level clearance.

If it rattles, one of the 10 OEM clips is still on vacation! Ensure the clip in its place is attached by pressing again until it clicks. Re-verify after the first drive to confirm all clips remain engaged.

Returns

Window — 30 days from delivery. Start a return at bulletcarbon.com/returns to receive your RMA#.

Condition — Parts must be unused, liner intact, and in original box. Bundles return as a full set. Adhesive installed/damaged clips = non‑returnable.

Shipping — We email a prepaid label (USA). $14 is deducted from your refund **unless the item is approved as defective**. International customers ship at their cost; defects get a shipping credit.

Refund — Store credit lands the moment the scan hits the carrier. Back‑to‑card on request (3 % processing fee). 15 % restock if packaging is missing or damaged.

Defects — Free replacement or full refund (including shipping) within 60 days when photo proof shows a manufacturing issue. Zero restock fees.

Need Help?
Ping **support@bulletcarbon.com**
— Real humans, fast replies.

Goal — Keep you stoked, not broke.